Yanmar C30R-3TV

Operating weight 2865 kg
Transport dimensions 3640 x 1565 x 2310 mm
Payload 2500 kg
Dump vessel capacity 1.13 / 1.50 m³ [struck / heaped]
Dumping mechanism Turning vessel 180°
Travelling speed 5.7 / 11 km/h
Yanmar diesel engine 4 cylinders
34.3 kW / 46 HP at 2800 rpm

More information

  • Compact dimensions: perfect partner for an efficient work in narrow jobsite
  • Turning vessel with high capacity: 1.50 m3 heaped
  • Upgraded operator station with reversible seat
  • Powerful Yanmar 4-cylinder engine with cooled EGR and DPF
  • Variable speed 2-pump, 2-motor Hydrostatic System (HST): optimized manoeuverability and smooth control

 

COMPACTNESS

The C30R-3TV is a very compact carrier for its class. It has a total width of 1.5 meter allowing this machine to be efficient even on very small job sites. A total length of 3.64 meters makes it easy to turn in every condition, especially with the feature that this machine can spin-turn 360°. This configuration offers the following benefits:
+ Increased efficiency of the machine
+ Increased productivity for the operator

180° DUMPING

The C30R-3TV with a swing wagon type. The wagon is mounted on a turning frame which can turn 180° (90° left, 90° right). This feature allows the C30R-3TV to dump the material by driving along a trench, and to get very close to the job site while maintaining a distance of security. This feature improves greatly safety and productivity.

 

POWERFUL YANMAR ENGINE

The C30R-3 benefits from the most advanced technology of the leading manufacturer of industrial diesel engines. The 4TNV88C engine is equipped with direct injection to create clean burning power. It has fully-electronic control to provide the C30R-3TV with total intelligent engine control. The engine is also equipped with a common rail system to allow fine-turned electronic control of fuel injection.

+ Cooled EGR (Exhaust Gas Recirculation) which reduces drastically the nitrogen oxides (NOx).
+ DPF (Diesel Particulate Filter) to clean up exhaust emissions (PM). Yanmar has successfully developed an exclusive regeneration system in order to combat clogging and cleaning down-time.

+ Auto-Deceleration system to further reduce fuel consumption

+ Eco-Mode to control the motor speed which is reduced by 330 rpm

 

ROBUST UNDERCARRIAGE

The C30R-3TV benefits from a very robust undercarriage. To further improve the all-terrain capabilities, track rollers are mounted by pair on bogeys in order to better absorb obstacles. This feature improves the operator comfort and the service life of the undercarriage components.

The total mass of the C30R-3 is evenly distributed on the ground via 24 rollers. Fully loaded, the machine has a ground pressure as little as 0,57 kgf/cm². This improves the all-terrain capabilities drastically and the C30R-3TV can work in the worst ground conditions.

 

UNIQUE TRANSMISSION CONCEPT

The C30R-3TV is equipped with a new variable speed 2-pump, 2-motor Hydrostatic Transmission System (HST) which integrates an anti-stall feature. Automatic hydraulic pressure adjustments allow the C30R to turn 360° smoothly without stalling the engine. The C30R-3TV does a 360° spin-turn in as little as 9,5 / 18,0 seconds (empty vessel / with load
2500 kg).
This feature offers to the customer an improved manoeuvrability, an increased driving comfort and increases the productivity.

 

EASE OF USE

With the proportional control system, the machine only moves as far as the joystick lever is pushed, and stops when the
lever is let go. Speed is controlled by moving the left joystick while vessel operation is controlled with the right joystick.
+ Forward and reverse travel, left and right turn, you can adjust
speed and use
+ The travel automatic dual speed switch to change between lowspeed
and high-speed easily.
+ A lock / release switch prevents from inadvertent operation,
+ An accelerator pedal enables to make fine speed adjustments
while operating the joystick.

 

COMFORT

Yanmar has been paying a lot of attention to the operator station by modernizing the look and feel of the newest version of the C30R-3TV. The operator has a lot of space, even for the legs, in order to improve his comfort.

The operator seat and travel levers can turn 180°, allowing the operator
to be always seated in the travel direction:
+ It improves drastically the safety
+ It improves the visibility of the operator
+ It reduces the risk of damages

 

HIGH PERFORMANCE

The C30R-3TV shows excellent performance on any jobsite. Whether in very narrow areas or on rough terrain, its high travelling speed and excellent vessel capacity (1,13 m3) enable to carry large amount of material fast and easily. It can work on the most various ground conditions thanks to its robust and powerful undercarriage.

The C30R-3TV benefits from a gradability of 30° and has a ground clearance of 280 mm: it can easily avoid obstacles and access isolated areas.